Skip Navigation

Furnace Repair

Furnace Installation & Replacement in Greensboro and Advance, NC

If your furnace won't start, keeps shutting off, or is blowing cold air, we can find out why and fix it. We provide furnace repair in Greensboro, NC, for gas, electric, and oil furnaces, with a second office serving Advance. Our service area includes Greensboro, Winston-Salem, Advance, High Point, Kernersville, Summerfield, Jamestown, and surrounding Triad communities.

Is your furnace not working properly? Schedule a repair service to determine the root cause and get an expert solution. You can book online, or if you have no heat, call (336) 439-6150 so we can check current availability.

Signs Your Furnace Needs Professional Repair

The same symptom can come from several different faults, so treat the causes below as possibilities, not a diagnosis:

Symptom Possible causes Next step
Won't start Thermostat settings or wiring, a tripped breaker or service switch, an ignition or flame-sensing fault, or a control board problem Check the thermostat settings, then schedule repair
Blowing cold air A fan set to "on," overheating from restricted airflow, or an ignition problem Check the fan setting and filter, then call if it continues
Short cycling A dirty filter, an overheating safety shutoff, a flame sensor problem, or a thermostat issue Replace a dirty filter, then schedule repair if it continues
Weak airflow A dirty filter, a blocked return grille, blower motor trouble, or duct problems Check the filter and vents, then schedule repair
Unusual noises A failing inducer or blower motor, loose parts, or delayed ignition Schedule repair, and turn the furnace off if you hear a bang at startup or grinding
Persistent odors Dust burning off at the season's first startup, an electrical problem, an oil issue, or a gas leak For gas, leave the home now (see below); for a burning electrical smell, turn the furnace off and call

Ignition, airflow, control, and electrical faults can look alike from the thermostat. Our technicians confirm which one failed before recommending a part. Heat pumps and boilers are covered on our heating repair page.

What Can You Check Before Calling?

These checks are safe to do without opening the furnace or reaching past what your owner's manual describes:

  • Thermostat mode and setpoint: Make sure it's set to heat, the temperature is set higher than the room, and the fan is on "auto" rather than "on."
  • Filter condition: A clogged filter can make the furnace overheat and shut down. If it's dirty, replace it with the size your manual lists.
  • Supply and return paths: Open any closed vents and move furniture or rugs that block return grilles.
  • Symptoms and codes: Note what the furnace is doing and when. If a status light is blinking through the viewing window, write down the pattern without removing any covers.

Don't relight the furnace, bypass a safety switch, or keep cycling the power to force a restart. Those controls shut the furnace down for a reason, and the technician needs to see why.

Gas Odor or a Carbon Monoxide Alarm

Smell gas or hear a carbon monoxide alarm? Get everyone outside now. Don't use light switches or your phone inside, and don't look for the source. Once you're safely away from the house, call 911 or your gas utility or propane supplier, and wait for responders to say it's safe before scheduling furnace service.

For more on carbon monoxide risks, read our guide on what to do when a CO alarm goes off.

How Webb Diagnoses and Repairs Furnaces in Greensboro

While every piece of equipment and home is different, at Webb Heating every furnace repair visit generally follows the same order:

  1. Intake: When you call or book, we note the symptoms, when they started, your furnace's fuel type, and anything you've already checked.
  2. System assessment: The technician runs the furnace through its heating sequence, from the thermostat's call for heat through ignition and blower startup, to see where it stops or misbehaves.
  3. Findings explained: You hear what failed, why it failed, and whether anything else looks close to failing.
  4. Options and price approval: We lay out your repair options with a price for each, and work starts only after you approve one.
  5. Approved repair: The technician completes the repair, or schedules a return visit if a part needs to be ordered.
  6. Operating checks: We run a full heating cycle to confirm the furnace starts, heats, and shuts down the way it should.

The assessment covers the controls, blower, and airflow on every system, plus checks specific to the fuel. Gas furnace repair in Greensboro includes the gas valve, ignition, flame sensing, and venting for safe combustion. Oil furnace repair in Greensboro and nearby areas includes the burner, fuel supply, and oil filter, and electric furnaces get an element and circuit check.

Emergency Furnace Repair and After-Hours Help in Greensboro

No heat after hours? Call Webb to discuss emergency service availability and restore furnace operation. Our emergency line at (336) 439-6150 runs 24/7, with technicians on call nights and weekends through the heating season.

Emergency service is meant for a furnace that has stopped heating, especially in a cold snap. If it still runs but heats weakly, a regular appointment is usually the better fit, and you can ask about after-hours charges before a technician is dispatched. Some repairs need a part that isn’t on the truck, which means a second visit to finish the job.

Furnace Repair Cost and Repair-or-Replace Decisions

Repair price depends on what the diagnosis finds and which part failed. Labor, access to the furnace, warranty coverage, and parts availability also shape the total, and you'll approve the price before work starts.

A single repairable fault isn't a reason to replace a furnace. We weigh the repair against the furnace's overall condition, its repair history, and what replacement would involve. When replacement is worth considering, our furnace services and furnace installation and replacement pages cover the next steps.

Why Homeowners Choose Webb for Furnace Repair

We've repaired furnaces across the Triad since 1978, from older oil systems to newer high-efficiency gas models. Our NATE-certified technicians explain what they find in plain terms and give you the options without pushing a replacement. Our A+ BBB rating and 100% satisfaction guarantee back that up.

Our Greensboro office is at 204 Pomona Dr, (336) 439-6150. For furnace repair in Advance, NC, and the western Triad, our Advance office is at 170 Webb Way, (336) 439-6150.

Schedule Furnace Repair and Plan Ongoing Care

Cold air, a furnace that won't start, and short cycling usually trace back to a short list of systems, and testing shows which one failed. To book, call (336) 439-6150 or schedule online. Have your address, a description of the symptoms, and your furnace's make, model, or fuel type ready if you know them.

After the repair, routine heating maintenance supports reliable operation, though no maintenance prevents every breakdown. A Webb home service agreement puts those visits on a schedule and includes repair discounts, so ask what your plan covers.

Schedule Online(336) 439-6150
Furnace Installation & Replacement FAQs

Frequently Asked Questions

Repair usually makes sense when the furnace is in good overall condition, and the fix is modest. Replacement deserves a look when repairs keep coming, a major part fails on an older unit, or a safety issue like a cracked heat exchanger turns up. We'll lay out both options so you can decide.

It depends on how much heat your home loses, which square footage alone can't tell you. A heating-load assessment accounts for insulation, windows, layout, and air leakage. It can show that a smaller furnace will do the job better than matching the old one.

Often, yes, if the ducts are sized correctly and in good condition. We check size, leaks, and returns first, since undersized or leaky ducts can keep a new furnace from performing as it should.

A simple furnace replacement in Advance or Greensboro often takes about a day. Venting changes, ductwork, electrical upgrades, or a fuel switch can extend it, and we'll give you an expected timeline with your estimate.

Yes. We offer free estimates for furnace installation and replacement, and financing is available for qualified buyers, subject to credit approval.

Financing Options
Flexible financing options to help you take care of your new purchase
Home Service Agreements
Make sure your HVAC equipment is always working when you need it.
Certified Excellence & 5-Star Service

Trusted by Your Neighbors in Greensboro, Winston-Salem, and the Piedmont Triad

We pride ourselves on offering the best products and services on all of our heating, air conditioning, electrical, and indoor air quality recommendations and installations.
cross